How to protect your WiFi Router from hacked with simple technic:
#1 – Change LAN IP Address or Login IP address.
Go to network > LAN
You can configure the IP parameters of LAN on this page.
MAC Address – The physical address of the LAN ports, as seen from the LAN. The value cannot be changed.
IP Address – Enter the IP address of your Router in dotted-decimal notation (factory default – 192.168.0.1).
if you change LAN IP normaly any one can’t login to your Router.
here enter the MAC and name than save this .
#3 – DHCP Settings
DHCP Settings Help
This device is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to this device in the LAN.
#4 – Binding Settings
Example: If you want to use binding to assign 192.168.0.4 to PC A (MAC: 00-E0-4C-00-07-BE) and to keep other PCs from using the address. First, enable the “ARP Binding”. Then add a new item in the binding table so that the table resembles the one below.
#5 – Password
change the admin Password / router login Password.
enter your Old User Name and Password, than set new user name and password.
SAVE and reboot your router.
Note: The new user name and password must not exceed 14 characters in length and must not include any spaces. Enter the new Password twice to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.
** The username and password must not exceed 14 characters in length and must not include any spaces!